Montréal Contre-information
Montréal Contre-information
Montréal Contre-information

How to make molotovs!

 Comments Off on How to make molotovs!  Tagged with:
Sep 042017
 

Anonymous submission to MTL Counter-info
Disclaimer: This video is intended purely for informational purposes only, and does in no way encourage or condone any illegal activity.

Languages: français | українська

We think that it’s important for confrontational tactical knowledge to be widespread for the coming storms of revolt. Confrontational tactics can make us safer, because the police become afraid. We need to be careful when playing with fire, but with care, molotovs can greatly increase our power in the streets.

Ingredients:

Empty 500ml beer bottles
Gloves
Gasoline
Motor oil
Funnel
Gauze or strips of t-shirt
Duct tape

Never touch any of your materials without gloves, to avoid transferring fingerprints.

First, fill the beer bottle half-way with a mixture of 2/3 gasoline and 1/3 motor oil. Adding motor oil makes the fire burn longer and bigger. Leaving empty space in the bottle makes it fill with gas-fumes, which will make the molotov more explosive.

For the fuse (shirt or gauze), tie a knot that will fit in the entrance to the bottle, 1 inch from the top. The fuse should reach the gasoline. If you turn the bottle upside down, the knot should hold. Use duct-tape to make the opening more air-tight, because gasoline evaporates.

For larger molotovs, you can use a wine bottle that has a cap you can twist back on. Perrier works too.

Beer-bottle molotovs can be transported in the packaging. Seal them in a garbage bag to diminish the smell of gasoline, and to keep them clean of fingerprints.

It’s safest to not wait more than 30 seconds to throw after the molotov is lit.

Stay safe! Stay fierce!

How to: fill fire extinguishers with paint

 Comments Off on How to: fill fire extinguishers with paint  Tagged with:
Jun 292017
 

Anonymous submission to MTL Counter-info
Disclaimer: This video is intended purely for informational purposes only, and does in no way encourage or condone any illegal activity.

Fire extinguishers filled with paint have been useful to anarchists in Montreal fighting gentrification, surveillance, and most recently, colonial advertising.

1. Steal the extinguisher

Find a water-pressurized fire extinguisher. They are metallic silver and come in two sizes.

Both sizes have removable tops, which are often attached with a nut.

The larger size is 9 L and has a schrader valve, like your bike tire, so that they can be easily repressurized. It is often found in universities, apartments and office buildings.

The smaller size is 6 L and needs to be repressurized with an air compressor. It is only found in restaurants because they are for grease fires, and are sometimes conveniently placed near the back exit!

2. Empty the water

Wear cotton gloves to avoid getting your prints all over the thing. Spray the water out of the fire-extinguisher, ensuring that the pressure gauge reaches 0 psi. We usually do this in an alleyway, but it can be done in your bathtub.

3. Fill with paint

Remove the nut and top section.

Fill the extinguisher about half way with a mixture of equal parts latex paint and water.

4. Pressurize

Reattach the top section, and make sure it’s tight.

For the 9 L, pressurize with a bike pump until the gauge reads 100 psi.

For the 6 L, there is no schrader valve, so you will need an air compressor, found at hardware stores or most pawn-shops. Remove the hose, and connect the air compressor tubing, using a 3/8” male adapter.

Set the air compressor to 115 psi. You may not even need to depress the handle of the extinguisher for the pressure to slowly raise to 100 psi. If you need to depress the handle, remove the safety pin and depress it gradually. Stop as soon as it reaches 100 psi, to avoid paint going into the tubing.

Return the safety pin and secure it with duct-tape.

5. Clean

Wipe down with a cloth soaked in rubbing alcohol to remove any fingerprints!

Check out the how-to page at Montreal Counter-info for more direct action guides: blocking trains, shutting down pipelines, demonstrations, riots and more!

“The only reason why we should reach to the higher class is to create disorder and disturb, but certainly not to corrupt graffiti like some people do. My goal is to install the insolence and violence of graffiti where it has no reason to be. Graffiti is a whole, and one cannot only take the parts he is interested in. The remaining parts can be found on your storefronts.”

A recipe for nocturnal direct actions!

 Comments Off on A recipe for nocturnal direct actions!  Tagged with:
May 172017
 

Anonymous submission to MTL Counter-info

[For reading]
[For printing, 11”x17”]

“Direct action, simply put, means cutting out the middleman: solving problems yourself rather than petitioning the authorities or relying on external institutions. Any action that sidesteps regulations and representation to accomplish goals directly is direct action—it includes everything from blockading airports to helping refugees escape to safety and organizing programs to liberate your community from reliance on capitalism.”

A Step-by-Step Guide to Direct Action: What It Is, What It’s Good for, How It Works

We believe that the greatest barriers to participating in direct actions are social ones: finding comrades to build affinity groups takes time, patience, and trust (see How to Form an Affinity Group: The Essential Building Block of Anarchist Organization). This recipe assumes that you already have people who you can get mischievous with.

Before we had ever done a night-time direct action, we felt hesitant to begin. We had no one to teach us the basics, and feared making stupid, easily preventable mistakes. For that reason, we want to share several logistical tips that we feel may be helpful in carrying out these actions.

Legal disclaimer: All information contained in this publication is for educational purposes only, and does not condone or encourage any illegal activity.

1. The secret is to begin

First, you need to choose the target of your direct action and what tactic you will use. Although this could vary widely, for this recipe we’ll use the classic example of smashing out the windows of a gentrifying business in an urban neighbourhood.

Think about what the action will communicate to people you’ve never met – from possible accomplices to the most passive citizen. What possibilities might this communication open up? For example, the numerous smashings of luxury businesses in Hochelaga and St. Henri over the past years have communicated a resistance to gentrification, have spread signals of disorder (see Signals of Disorder: Sowing Anarchy in the Metropolis) that visibilize how anarchists are fighting back against social control, and in some cases, have contributed to such businesses having to close up shop.

There are introductions to ‘security culture’ available elsewhere (see What is Security Culture?), but here we’ll just say to do all of your planning in person, with people you trust, outside of houses and with no phones present (both being vulnerable to police surveillance).

When we started getting our hands dirty, we found it helpful to first get comfortable with less risky activities like graffiti or wheatpasting posters, practicing the same communication habits we would later apply in attacks. This helps us become acquainted and feel more comfortable with our ability to act in stressful conditions (encounters with police, evasion, etc.) and our relationships with each other.

2. Scouting

Scout the target ahead of time; look for the safest entrance route and exit route, prioritizing paths with fewer cameras (alleys, woods, bike-paths, train-tracks, residential areas). If you use bolt-cutters to cut a hole in a fence, will that open more possibilities? Have fun subverting the urban organization of space designed for social control to your purposes of social war.

Be discrete; don’t point at the cameras you want to smash, or walk in circles around the target. Decide where to position lookouts (if you think you need them), posted up smoking at bus stops that aren’t on camera, for instance. How will they be communicating with those doing the direct action: hand signals, inconspicuous shouts of random names to signify different situations, walkie-talkies, flashlights, burner phones (see Burner Phone Best Practices)?

It helps to know what the traffic patterns are like at the time you’ll be acting. How busy is foot traffic? Where is the closest police station, and what are the most patrolled streets? Doing the action on a rainy night at 3 am means there will be fewer witnesses, but also fewer people to blend in with afterwards when police might be combing the area, so sometimes closer to midnight will make more sense. Once you’ve gained confidence in nocturnal actions, maybe you’ll want to experiment with day-time actions that are more visible to passersby and thus harder for the authorities to invisibilize, like the looting of the yuppie grocery store in St. Henri last year. Leave at least a week or two between scouting your target and the action because that’s the average amount of time it takes for surveillance footage to be overwritten.

3. Fashion decisions! (and other prep)

Wear two layers of clothing; a casual layer for the action that includes a hood and hat, and a different layer underneath so that you don’t match any suspect descriptions. Blend in with the character of the area; it doesn’t make sense to dress like a punk in a yuppie neighbourhood, but it does make sense to be in flashy jogging gear if you’re going to be running down a bike-path. Baggy clothing can help to disguise body characteristics. A hat and hood will keep you relatively anonymous during your approach – most cameras are pointed from above, so your face will be mostly obscured when you’re looking down.

You can pull up a full mask for the last few blocks and the action itself (see Quick Tip: How to Mask Up). Depending on the terrain and where cameras are located, you may afford to wait until right before the action to mask up to avoid arousing suspicion preemptively.

Expect to be seen on camera during the action. Don’t get too paranoid about cameras in the surrounding area – a standard CCTV camera has poor resolution in the dark, if police even bother to get the footage before it’s overwritten automatically. All surfaces of any tools you’ll be using should be thoroughly wiped with rubbing alcohol ahead of time to remove fingerprints, and cotton gloves should be used during the action (leather and nylon will retain your fingerprints on the inside). Do not take your cell phone, or if you must, remove the battery; it geo-locates even when powered off.

Make a plan in case a good citizen intervenes, or starts following you to call the police. Dog-mace has worked wonders for us, but if that feels too intense as an immediate response, being verbally confronted by a masked group is enough to deter most people.

4. It’s witching hour

Once lookouts are in their locations and they give the agreed upon starting signal, take a final glance around, and go for it! For breaking the windows of a gentrifying business, bring enough rocks for several windows, aim for the bottom corners, and make sure you’re finished up within, say, thirty seconds of the first crashing glass pane. If you also want to put glue in the locks, paint-bomb the sign (see Paint bombs: light bulbs filled with paint), pull down the cameras (see the tips in Camover Montreal), write a graffiti message (in blocky ALLCAPS to hide hand-style particularities), or anything else that’s relatively quiet, do this before you make a kerfuffle breaking the windows, or plan for an extra friend to do it simultaneously.

Ditch everything including your top layer of clothing at the soonest appropriate place along your exit route – cops have lights that will reveal glass shards on clothing (more of a problem if you use hammers than rocks). Find creative hiding spots ahead of time to ditch anything you don’t want found, but as long as your materials and clothing are free of fingerprints it shouldn’t matter. The exception to this is arson tactics, where DNA forensics are more likely to be used, in which case you may want to take everything with you in a backpack and dispose of it farther away.[1. A note on DNA forensics: a basic principle is to never touch (or otherwise contaminate with hair, sweat, skin cells, dandruff, saliva, etc.) anything you’ll be leaving behind, because unlike fingerprints, DNA can’t be scrubbed off. Surgical gloves (sold at many drugstores) used with ‘sterile technique’ (learned on youtube) can allow you to manipulate materials without contaminating them once they leave their packaging. This should be accompanied by securing hair under a tight-fitting hat or swimming cap, a surgical mask to prevent airborne saliva, and wearing a long-sleeved shirt you’ve never worn that goes under your gloves (or even better, painter’s coveralls used for mold and asbestos removal). Work on a raised surface so that you don’t have to be bent over your materials. Have a second person (taking the same precautions) drop materials out of their packaging and onto your ‘sterile field’ (you can use a newly opened shower curtain, for instance), so that once you’re sterile you don’t contaminate your gloves with packaging you may have touched. To transport your materials, seal them in a garbage bag.]

Ideally, even if you are detained by police on your way out, you’ll have nothing on you that they can use to connect you to the crime. Know your story of why you’re in the neighbourhood, or be ready to remain silent because if they find evidence to contradict your story, it can be used against you in court, while your silence can’t be held against you. When arrested in Quebec, you only have to give the police three pieces of information: your name, date of birth, and address (this may differ in other places; it may be useful to be knowledgeable of local laws before carrying out any illegal action).

Once you’re arrested, saying anything else will do more harm than good. After providing the above three pieces of information, you can repeat the following phrase: “I have nothing more to say. I want to speak to a lawyer”. (If things go south, check out How to Survive a Felony Trial: Keeping Your Head up through the Worst of It. In Montreal, get in touch with the Contempt of Court collective for help with legal representation.)

A typical police response (if there even is one – often times vandalism is only discovered the next morning) will involve police first going to the scene of the crime, maybe taking the time to ask possible witnesses if they saw anything, then driving around the surrounding streets looking for possible suspects. If you get out of the immediate area quickly, you’ll avoid all of this. Hiding can be a viable option if something goes awry and leaving as planned looks risky – backyards, corners of driveways, rooftops, bushes, etc. can all be helpful in waiting it out.

5. Sweet dreams!

Consider using a bike to get out of the area quickly – you can have it locked a short jog away. Bikes can be disguised with new handlebars and saddles, black hockey-tape on the frame, removing identifying features, or an all-black paint job.

It’s best to avoid using cars if possible – a license plate is far easier to identify than a hooded figure on a bike. But if you must because the location is too difficult to get to otherwise, be careful. You could park a bike-ride away in an area that’s not on camera. Be dressed totally normally when entering the car. Take back roads and know your way around. Don’t use cars that may be already known to police, in case they have been tagged with a GPS surveillance device, and don’t use a rental (in part why Roger Clement got caught for arsoning an RBC branch against the Vancouver Olympics).

Rest well knowing that you’ve fucked up a small part of this fucked up world.

Check out How to safely submit communiques if you want to claim the action! Also check out this How-to page for more direct action guides: blocking trains, shutting down pipelines, demonstrations, riots, and more!

How To: Wheatpaste

 Comments Off on How To: Wheatpaste  Tagged with:
Feb 162017
 

Wheatpasting is a simple, dirt-cheap way of spreading ideas, news, analyses, and creative expression outside of (and against) the pacified modes made available by the institutions that control and mangle our lives. Let’s reclaim, together, the means of expression from the media, Facebook, Twitter, smartphones, and everything else that reduces us to mere observers of life. Poetry is in the streets!

WHAT YOU NEED
•1 cup of flour
•2 cups of water
•Stove or hotplate
•A pot or pan
•A large paintbrush
•A bucket or container
•Flyers that you want to put up
•Latex gloves (if you don’t wanna walk around with drippy hands)

(OR, you can use a gallon of pre-made “wallpaper paste,” which can be bought cheaply at hardware stores. If you do this, you can skip these first three directions.)

DIRECTIONS
•Mix the 1 cup of flour with 2 cups of water together in a pan and stir until there are no lumps.
•Heat the mixture by boiling it until it thickens.
•Cook for about half an hour, and then let it cool.
•Put the wheatpaste solution into a container, grab a paintbrush, some flyers, and head out into the night. Keep in mind that wheatpasting is not “legal” and therefore, it is best to go late at night and avoid being seen by cops.
•When you locate a visible, non-porous surface like metal or glass, use the paintbrush to apply the wheatpaste to either the back of the flyer or the surface itself and smooth the flyer down so there are little or no air bubbles. Put some more wheatpaste on the front of the flyer (especially the edges) to secure it to the surface.

 

Print PDF here, for making two-sided posters that have this short instructional guide on the back.

Source: Plain Words

Solidarity with #NODAPL: How to block trains

 Comments Off on Solidarity with #NODAPL: How to block trains  Tagged with:
Dec 132016
 

Anonymous submission to MTL Counter-info
Disclaimer: This video is intended purely for informational purposes only, and does in no way encourage or condone any illegal activity.

Trains are one of the main ways that oil is transported across Turtle Island. Physical blockades of the tracks have been used effectively many times to hamper ecocidal projects of “resource extraction”.

We can also block the rails in a sneaky way: by tricking the signalling system into thinking there is a train on the tracks. This trick will force train traffic to come to a halt until the signal blockage is cleared. It can be done in under a minute, and repeated many times to have a significant impact on train circulation. It can take hours to find and remove this blockage, stopping all train traffic in the meantime.

Here’s how their system works:
A low velocity current runs through each rail. The electricity runs across the junctions of an individual rail with copper wire connections. When a train passes, it forms an electrical connection between rails and signals its presence.

Here’s how we can block the signal:
Get some 6-gauge booster cables. You can paint the wire black to make it harder to find. Rust on the tracks can prevent a solid connection, so connecting directly to the tracks might not work. To avoid this problem, find a section of rail where two junctions are side by side, and connect the copper wires with the booster cable. You can hide the wire with snow or rocks. The connection will lower railway crossing barriers that are nearby.

Oil Pipelines are easy to shutdown

 Comments Off on Oil Pipelines are easy to shutdown  Tagged with:
Oct 232016
 

From SubMedia.tv

In less than a year seven oil pipelines in the US and Canada have been shutdown by climate activists, costing oil companies millions. Here’s how they did it.

CORRECTION: In our haste to produce a video homage to Jean Leger, we mis-identified the three people in Sarnia as women, when two identify as queer and one as non-gender binary. We apologize for this oversight and will do our best to research the gender identities of people in our videos.

Quick Tip: How to Mask Up

 Comments Off on Quick Tip: How to Mask Up  Tagged with:
Sep 252016
 

From subMedia.tv

Let’s face it, we live in a time where surveillance devices are all around us, be it police with video cameras, CCTV or citizens with mobile phones. So when we decide to take to the streets to oppose the state and their police, it’s wise to hid our identity.

For more tips on security culture check out these links:

  1. What is a Black Bloc?
  2.  Warrior Crowd Control & Riot Manual
  3. What is Security Culture?

How to safely submit communiques to MTL Counter-info

 Comments Off on How to safely submit communiques to MTL Counter-info  Tagged with:
Aug 082016
 

We thought it would be useful to summarize a basic technique to anonymously submit communiques, using the Tails operating system.

Tails is a computer operating system designed with security in mind, which can boot off a USB or CD, from any computer. After shutting down Tails and ejecting the USB or CD, the computer can start again with its usual operating system. Tails is designed to leave no trace on the computer by not interacting with the hard-disk, and only using the RAM for memory (which is automatically erased when Tails shuts down). In addition, it forces every internet connection to go through the Tor network [1. TOR is a network of proxies run by volunteers with the explicit purpose of maintaining anonymity online. With TOR, your connection goes through three proxies. You connect to TOR and each of the three proxies (nodes) you access encrypts your data. No individual node can know both what you are connected to and who you are. The third node decrypts the data and accesses the website, sending the information back through the proxies in encrypted form.], so is much safer than using just a Tor browser on your normal operating system.

IP and MAC addresses:
Every internet connection has a specific IP address[2. An Internal Protocol address is a string of numbers that allows you to send and retrieve data over an internet connection (for example, 78.125.1.209). This number identifies the location, Internet service provider, and technical details of your connection. It is comparable to a house’s street address. An unobscured IP will lead investigators directly to your connection.] that can be logged by websites that are visited, and which reveals the connection that was used. An IP address can be traced to the internet subscriber it’s assigned to, whether an individual or a business like a café.

Every computer has a MAC address[3. The Media Access Controller address specifically identifies your computer. If you access the internet, the router may log your MAC address and maintain that log. If investigators were to read the logs of a router you accessed (say, a public wifi from which a communiqué was sent), and then compare that address with the MAC address of your computer’s wireless card (say, confiscated in a raid), you’d be connected to your activity while using that router’s connection. If the MAC address is not changed, there is the possibility of your activity being traced back to you if investigators are persistent or lucky enough.] , which can identify the specific computer that connected to a site via the IP address.

Tails automatically conceals the IP address by using the TOR network, and automatically gives the user a fake MAC address upon starting.

1. Download and install Tails
Tails can be downloaded at tails.boum.org. See ‘Tails Installation Assistant’ on the site for instructions on how to download and verify the file, install it on a USB or CD, and boot it on your computer.

2. Boot Tails
Depending on how risky your activity is, it might be best to use a computer that isn’t connected to your identity (in case Tails, for whatever reason, does leave a trace). This could be a public computer out of sight of surveillance cameras, or a laptop used specifically for this purpose.

If you start the computer with the USB plugged in, and Tails doesn’t start automatically, you might have to access the ‘boot menu’ of your computer. On most computers, you can press a boot menu key to display a list of possible devices to start from (identify the potential boot menu keys for the computer depending on the computer manufacturer in the list below). In the boot menu, choose your USB. For troubleshooting, see ‘Start Tails’ at tails.boum.org. You may need to edit the BIOS settings.

3. Connect to internet
If using a laptop, you can access many wifi networks with prior knowledge of the password from outside the building, even at night if they leave the wifi on. Use wifi that doesn’t have a ‘captive portal’ (that makes you accept terms and conditions).

4. Submit Communique
Open TOR browser, and verify TOR is functional by going to check.torproject.org. Change your TOR Security Level in ‘Privacy and Security’ preferences from Standard (default) to Safest. Visit https://mtlcontreinfo.org/publish/ to send us your communique! If submitting any images, video, etc., remove identifying information (metadata) with the Metadata Anonymization Toolkit (MAT) on Tails.

More In-depth Resources:
• Surveillance Self-Defense: Tips, Tools and How-tos for Safer Online Communications
• Anonymity/Security zine
• Surveillance and Counter-surveillance Guide

tailshowtotailshowto2
8.5 x 14″ | PDF

CAMOVER MONTRÉAL

 Comments Off on CAMOVER MONTRÉAL  Tagged with:
May 282016
 

camfeaturedAnonymous submission to MTL Counter-info

In CamOver, you play a group of humans confronted with an invasion of cameras in a gentrified neighborhood. The struggle against the cameras is important, but your own survival is essential! To win you must form teams with friends in your neighborhoods and destroy as many cameras as possible. The game takes place throughout the summer. At the end, the neighborhood with the most points wins the game.

Let the vandalism begin!
Let’s make our summer nights magical and vibrant!

Terms of Engagement

1. Preparation
Speak with your friends and gather a small affinity group. Walk around your area and identify the potential targets. During the scouting, take care to note the following aspects for each target: where to mask up without being seen, where to position the lookouts, and where the exit route will be.

Gather the following items:
mask, gloves & unidentifiable clothing
extinguisher / hammer / rope / spraypaint / rocks

2. Sabotage
The night has arrived. Choose the right tool and be on your way. Position the lookouts, mask up at the predetermined spots and check that no one sees you. Carry out the act of sabotage and then take the exit route as quickly as possible.

3. Let people know
Count up your points: one for each camera. Write a short text recounting the actions and send it to mtlcounter-info•org. You can also attach an image or video to the text. If you manage to leave with any of the destroyed cameras, get creative: pose with them, dance with them, turn them into puppets or an art installation.

Why play?
• To develop skills that can be used in many situations: using certain tools, planning actions, becoming unidentifiable, escaping from the police, communicating during these types of moments.
• Developing and nourishing complicity and affinity between friends through action.
• Transform our relationships to our neighborhoods: develop an intimate knowledge of the streets, the buildings, the alleys, etc.
• Make the neighborhood safer: for people whose daily activities are criminalized (drug dealers, sex workers, etc.), for graffiti writers, and for those who wish to struggle against systems of domination.

For camera mapping in Montreal:
montreal.sous-surveillance.net
To post communiques of your actions:
mtlcounter-info.org

Using rope
• Attach a small object, such as a piece of wood, to a rope.
• Throw the rope over the camera arm.
• Grab the two ends of the rope and pull!

How to fill an extinguisher with paint
• The right extinguishers are silver and have a nut and a valve. They can be found in apartment buildings and restaurants.
• Empty the extinguisher by squeezing the trigger, and remove the top by unscrewing the nut. Pour in a mix of latex paint and water, with a 1:1 ratio.
• Replace the top and pressurize the extinguisher with a bike pump or a pressurizer, to 100 PSI.
• Use gloves while touching the extinguisher to avoid leaving fingerprints on it. It’s a good idea to wear a raincoat to keep the spray off your clothes.

camovermtlen
11 x 17″ | PDF

36″ width for architecture printer | PDF

camovermtl-36throwcamovermtl-36rope

camovermtl-36spray

 

Staying safer in the streets

 Comments Off on Staying safer in the streets  Tagged with:
Apr 082016
 

For the next time… Staying safer in the streets

Why wear a mask? It allows us to take action without fear of immediate identification. It’s not enough to cover half our face. Even if we get away, the police may use photos or video to charge us later. It’s best to cover our hair, face, arms, tattoos, and hands. Cloth gloves are best because they don’t transfer print, unlike plastic gloves. Make sure there are no identifying features on your clothes, shoes, or backpack; it’s nice to have a change of clothing. If we bring any materials with us, let’s wipe them down with rubbing alcohol to remove fingerprints. Bragging and storytelling are natural, but they’re easy to use against us. Don’t post anything on Facebook that we wouldn’t show a cop. The same goes for Twitter, Instagram, Tumblr. Remember that police will read our texts and call-log if they arrest us. If you are arrested, invoke your right to remain absolutely silent; name, address, birthdate and no more.

safe8.5 x 11″ | PDF